Hebei Woqin Vacu-Series™ VIP: 1/10 Thickness, 15x the Thermal Resistance

The Hidden Cost of Traditional Insulation

Traditional insulation is eating into your project profits in ways you might not even realize:

Space Waste: 200mm thick mineral wool occupies valuable floor space, costing €3,000-€15,000 per square meter in premium European real estate markets

Uncontrolled Thermal Bridging: Over 30% of heat loss occurs at seams and fasteners, driving up energy costs and failing EN 1991 load requirements

Hidden Structural Risks: Full-adhesion installation causes interstitial condensation, leading to structural mold and complete insulation failure in 3-5 years

Short Service Life: Traditional materials settle and powder in 5-10 years, with replacement costs 3x the initial investment

Increasing Compliance Pressure: Stricter EN 13501-1:2018+A1:2021 fire standards and Passive House PHI U-value requirements

"In a building with failed insulation, up to 90% of heat escapes through invisible gaps and decay."

Not Just a Material, But a Complete Thermal Management System

Hebei Woqin's Vacu-Series™ VIP redefines the physical limits of thermal insulation. We don't just sell panels — we deliver a complete thermal management system that solves the industry's most persistent problems.

1. Industry-Leading Thermal Performance

20mm Vacu-Armor™ = 200mm Mineral Wool = 150mm PU/PIR

Reduce insulation thickness by 90% for the same thermal performance. Reduced insulation thickness translates directly to increased usable space and project value.

2. Exclusive Installation System

Breathable Micro-Channel Technology: Creates a continuous 3-5mm air cavity between the panel and substrate, actively venting trapped moisture to prevent structural mold at the source. Thermal simulation verified: cavity impact on overall U-value < 2%.

Cap Thermal Break Technology: Special cross-shaped thermal insulation anchor plates + aerogel/VIP hybrid thermal break strips completely isolate metal flanges and fasteners, effectively eliminating measurable thermal bridging, achieving a near-zero thermal bridge coefficient (ψ-value).

3. Full Lifecycle Reliability

Vacu-Core™ with integrated zirconium-aluminum getters, ≤1.0 mbar internal vacuum pressure after 60 years (extrapolated from 10,000-hour Arrhenius accelerated aging tests at 80°C/85% RH) | [ Download Full Aging Test Report ]

Vacu-Armor™ with 0.1mm 304 stainless steel encapsulation: 118 kPa compressive strength tested according to EN 826:2013, 79N puncture resistance per ASTM D4833-20

All thermal conductivity measurements performed at 25°C mean temperature according to ASTM C177-19 (guarded hot plate method)

All data verified by CNAS/CMA/Tsinghua University certified laboratories, fully traceable

4. One-Stop EU Compliance Service

All products meet CE, REACH SVHC and EN 13501-1 standards. We provide complete technical documentation and CIF cost optimization solutions for EU import.

5. Solving the Industry's Unspoken Problems

Edge Effect Mitigation: Our optimized 1:2 panel aspect ratio and proprietary edge sealing technology reduce edge thermal loss by 35% compared to standard square VIPs.

Damage Resilience: Vacu-Armor™ panels can withstand localized punctures without catastrophic vacuum failure. We provide non-destructive vacuum testing kits for on-site quality verification.

Repairability: Unlike traditional VIPs that require full replacement, our modular system allows for single-panel repair without disrupting the entire insulation layer.

Custom VIP Solutions for Every Application

We offer three specialized product lines to meet the unique requirements of different industries:

[ View Full Product Specifications ] | [ View 1mm Custom Version Technical Sheet ] (Separate subpage for special requirements)

Measurable Engineering Outcomes

Woqin VIP delivers tangible, quantifiable benefits across all industries:

Building & Construction: Reduces wall thickness by 180mm, allowing architects to meet EN 1991 (Eurocode 1) load requirements while maximizing net floor area. In European markets, this translates to €240,000 to €960,000 in added property value (based on €3,000-€12,000/m² average prices).

New Energy Vehicles: Reduces battery pack thermal mass by 60%, enabling faster pre-conditioning and maintaining cell temperature within ±2°C across -40°C to +60°C ambient range. Increases winter range by 15-20% (third-party verified).

Cold Chain Logistics: Achieves thermal transmittance (U-value) of 0.10 W/(m²·K) at 10mm thickness, exceeding EN 12524 requirements for cold storage facilities. Increases cargo volume by 20% and cuts refrigeration energy consumption by 50% (based on industry simulations).

Trusted by 500+ Projects Worldwide

Our VIP solutions have been successfully deployed in over 500 projects across 12 countries in Europe, Asia and North America.

Ready to Upgrade Your Insulation System?

We provide:

✅ Free sample shipping for qualified corporate clients

✅ Project-specific thermal simulation and structural load calculations

✅ Custom dimensions and technical solutions

✅ On-site installation guidance and engineer training

Our Promise: All inquiries will be responded to within 24 hours with an initial design sketch

Company Information

Hebei Woqin Trading Co., Ltd.

Tel: +86 13933929092

Email: an@cn-aerogel.com

Website:insulatewool.com

[ Submit Your Inquiry Now ]